Towertalk
[Top] [All Lists]

Re: [TowerTalk] Measuring Coax Loss

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Measuring Coax Loss
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Fri, 12 Feb 2010 00:16:49 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Tod -ID wrote:
> Having inadvertently started this very long thread by pushing SEND rather
> than DELETE on my email I am feeling a little guilty about all the bandwidth
> it generated.
>   
Not to worry, I think it developed a lot of good discussion.
and...I think you have a pretty good summary below.
73

Roger (K8RI)
> My summary for non-technical or new guys after reading all of the comments
> is:
>
> Any thing you can do to capture additional signal when the signal level you
> want to hear is arriving at your receiver at S1 or lower [or just under the
> ambient noise at any level] deserves your consideration. After considering
> your personal current financial circumstances you may wish to invest in the
> 'high price tag' stuff just to feel that you have done all that you can to
> make your station perform well.
>
> Some of the tips about 'free' 75 ohm hard line should not be ignored -- the
> guys suggesting this are notorious for having REALLY GOOD SIGNALS [even
> running low power].
>
> Probably time to let this one die a natural death.
>
> Tod, K0TO
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>