Towertalk
[Top] [All Lists]

Re: [TowerTalk] Where should the nuts go?

To: "'Tower and HF antenna construction topics.'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Where should the nuts go?
From: "Fredric T. Serota" <fserota@msn.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Tue, 13 Apr 2010 15:24:39 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks. Appreciate your response.

Fred K3BHX

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K7LXC@aol.com
Sent: Tuesday, April 13, 2010 2:01 PM
To: towertalk@contesting.com; fserota@msn.com
Subject: Re: [TowerTalk] Where should the nuts go?

 
In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  Just putting up a new TX455. The base plate comes with 3  nuts on each 
long
bolt embedded in the concrete. Question is: Do 2 nut  belong below the
baseplate for locking the level, and one nut above the  plate, or the other
way around with one nut below and 2 nuts  above?
 
    The weight of the tower will keep the bottom nuts  from going anywhere. 
You double nut the top of the bolts to make sure they  won't go anywhere 
either. 
 
Cheers,
Steve    K7LXC
TOWER TECH
UST Factory authorized installer 



 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>