You can get these cylinders at Harbor Freight.
Rick N6RK
NPAlex@aol.com wrote:
>
> Dan,
>
> The problem of getting heavy lubricant into a difficult location was a
> typical automotive issue trying to get 90w hypoid oil into the differential
> gear housing in the rear axle. The solution was effectively a big syringe.
>
> It was a cylinder about 2" in diameter, a plunger and a flex nozzle. Stick
> the nozzle into the oil, suck it up into the cylinder and then squirt it
> into the rear gear box. They used to be available in supply houses catering
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|