Hi George,
So the lesson to be learned is unless you want an ElectorSet project Don't
do this!
Thanks to all for their input. I was pleased to find this information
because I was thinking about getting
a brand new HyTower (thats got some age on it even though it has always
lived indoors) re-galvanized.
I would have been pretty upset to get some nicely galvanized parts back that
were not the previous tower!
73 Larry WA9VRH
----- Original Message -----
From: "George" <n4ua.va@gmail.com>
To: "Adam Shirley WJ4X" <wj4x@amsat.org>
Cc: <towertalk@contesting.com>
Sent: Saturday, July 31, 2010 4:27 PM
Subject: Re: [TowerTalk] Rohn HDBX 48
> Well, half of it's true, but the end result is the same. The rivets are
> aluminum, but they get et up (past tense of eat ;-) by the hydrochloric
> acid pickling bath that is one of the early steps in the hot-dip
> galvanizing process. If they actually made it to the molten zinc bath,
> they would probably lose their temper (you would too), but the zinc is
> below the melting point of aluminum.
>
> 73,
>
> geo - n4ua
>
> Adam Shirley WJ4X wrote:
>> This is very true!
>>
>> 73!
>> -Adam
>> WJ4X
>>
>> On 7/31/2010 3:19 PM, Larry WA9VRH wrote:
>>> Hi Tom,
>>>
>>> In case you are thinking of getting it re-galvanized DON'T! Last I knew
>>> they were held together with aluminum rivets which will melt!
>>>
>>> However maybe someone can confirm or deny.
>>>
>>> 73 Larry WA9VRH
>>>
>>> ----- Original Message -----
>>> From: "Tom Anderson" <andersonww5l@sbcglobal.net>
>>> To: <TOWERTALK@contesting.com>
>>> Sent: Saturday, July 31, 2010 11:25 AM
>>> Subject: Re: [TowerTalk] Rohn HDBX 48
>>>
>>>
>>> Tnx to all for the HDBX 48 help. Now just have to formulate my plan of
>>> action to get the thing down from my XYL's aunt's home in Central Texas.
>>>
>>> 73 de Tom, WW5L
>>> Colleyville TX
>>>
>>>
>>> --- On Thu, 7/29/10, Tom Anderson <andersonww5l@sbcglobal.net> wrote:
>>>
>>>> From: Tom Anderson <andersonww5l@sbcglobal.net>
>>>> Subject: Rohn HDBX 48
>>>> To: TOWERTALK@contesting.com
>>>> Date: Thursday, July 29, 2010, 7:21 PM
>>>>
>>>>
>>>> Anyone on the list have any experience at taking down a
>>>> Rohn HDBX 48? My XYL's uncle died a while back and his
>>>> XYL is seliing their house and wonders if I'll just come
>>>> take it down. She doesn't want it.
>>>>
>>>> Also will the sections fit nested in the back of a standard
>>>> pickup or is a trailer better?
>>>>
>>>> My experience is limited to Rohn 25 and a TriEx W51.
>>>>
>>>> Tnx de Tom, WW5L
>>>>
>>>>
>>>>
>>>>
>>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|