Hello-
I am sure everyone is well aware, but let me say this regarding the direct
burial cables- The good ones, such as LMR400DB, have a sealant material that
will eventually migrate into the dielectric to a degree, and start affecting
the
cable characteristics. The losses, mostly a concern at VHF, can increase.
Thanks, WA5THJ
________________________________
From: M. Kent Miller <K4MK@triad.rr.com>
To: kg0mn@yahoo.com
Cc: towertalk@contesting.com
Sent: Thu, September 16, 2010 1:59:17 PM
Subject: [TowerTalk] LMR-400 or Davis RG-213
Kevin,
I use Davis RF Bury-Flex on everything here, including 12 runs of cable lengths
from 150 to 650 feet. It is used for all the rotor loops also. Works great --
never any problem with it.
73,
Kent - K4MK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|