Some bottom paints contain copper. Not good for an insulated mast.
Best for fiberglass is marine gel coat paint. Not cheap though.
73
Gary K4FMX
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Mike & Becca Krzystyniak
> Sent: Thursday, October 14, 2010 10:46 AM
> To: 'Joseph W. Morgan'; towertalk@contesting.com
> Subject: Re: [TowerTalk] Protecting Fiberglass Antennas Parts
>
> Not sure about using this on insulators but I have successfully used
> antifouling bottom paint (for boats) to treat fiberglass quad spreaders.
> Never had a uV issue.
>
> Mike K9MK
>
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Joseph W. Morgan
> Sent: Thursday, October 14, 2010 9:21 AM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Protecting Fiberglass Antennas Parts
>
> What's something good to seal and protect fiberglass insulators from sun
> damage on antennas? Spar varnish?
>
> Joe, W6BCZ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|