Marty ET AL,
I can attest to the fact that the Ham-IV controller can be used in place of the
T2X. Good luck in your quest.
Semper Fi,
Tommy - K6YE
DX IS
----- Original Message -----
From: TexasRF@aol.com
To: n8de@thepoint.net, Brahmangou@aol.com
Cc: towertalk@contesting.com
Sent: Monday, October 25, 2010 11:36:41 AM
Subject: Re: [TowerTalk] Is there any difference between a Ham4 VS T2X
controller?
And the extra LED that let's you know the brake switch is depressed (as if
you would not know that).
73,
Gerald K5GW
In a message dated 10/25/2010 12:20:04 P.M. Central Daylight Time,
n8de@thepoint.net writes:
NO difference. Just the "tailtwiser" label on the front.
73
Don
N8DE
Quoting Brahmangou@aol.com:
> Hi All,
>
> I'm piecing my station together after a major lightning strike. My
> Tailtwister controller took a big hit, but after bringing the rotor
> down from the
> tower and bench testing it, the rotor itself works OK. On the bench, I
> hooked it up to a Ham IV controller. The combination turns and
indicates
> position fine. I'm just wondering if the T2X controller has a bigger
> transformer
> in it, or any other differences, that would make me not want to use this
> combo.
>
> 73,
> Marty AB5GU
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|