Date: Tue, 7 Dec 2010 07:53:43 -0600
From: "Mike & Becca Krzystyniak" <k9mk@flash.net>
Subject: [TowerTalk] Using Ring Rotors on crank up towers
I was wondering is anyone is using ring rotors on one of the larger crank
up towers to stack yagi's (along with a rotor on top)?
Thanks in advance.
Mike K9MK
## done all the time. Contact Carl at Tic-gen. He has pix of this. He uses
the same
brackets that hold up the big 'Que' rack, but with a twist. Instead of the
normal flat
plates and U bolts that would attach to a say rohn 45 tower leg, he instead
uses these
long, solid cylinders welded to the plates. The solid cylinders simply
drop inside
the top of the tower legs for what ever section you want to mount the Tic
ring at.
## On a HDX-689, [ 6 x section, 89' tower] the Tic 1032 will mount at
both the
72' level and also the 55' level.
Later.... Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|