Sejo,
Send me your mailing address and I'll send you copies of what I have - maybe
a dozen sheets that have something about the RBX-40.
Most of them are not what I would call specifications but they may be
useful.
I'm looking at a catalog sheet that may be as close to a specification as I
have.
It has a column headed as "Wind Load". It says 90 mph with an antenna height
of 40 pounds with antenna load of a 4element 20 meter or a 9 element
triband.
I've got one with a house bracket that is somewhere over 60 ft up which has
worked fine except for a "little" microburst causing it to bend over the top
20 ft (not guyed) about 80 degrees. A bucket truck with a pro tower guy got
it down. With a good welder it's up again.
Send me your address and I'll send a copy of what I have.
73, Harry, W3IIT
=============================
----- Original Message -----
From: "Tower Su" <towersu@yahoo.com>
To: <TowerTalk@contesting.com>
Sent: Thursday, December 16, 2010 9:23 PM
Subject: [TowerTalk] RBX-40 by E-Z Way
> Looking for any documentation for the RBX-40 antenna tower made by
> E-Z
> way.Did a research on the internet and found only 3 page E-Z Way Towers
> catalog with Tower Wind Load chart.
> Need a Spec sheet , foundation details with Max Vertical Force, Max
> Overturning
> moment,
> Any information would be appreciated !
>
> Thanks
> 73
>
> Sejo , N3UA
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|