Be aware that if you're tempted to use the G5RV on a band where the
VSWR(50) is high, the 1:1 balun windings may need to withstand some
quite high voltages. For example, on 30m at 1400W the voltage between
the wires of the bifilar pair will be about 2,500V peak.
Steve G3TXQ
On 01/02/2011 21:19, Rick Karlquist wrote:
> I meant to say "low voltage lighting" zip cord. It has very
> thick insulation. Although meant to operate at 12V, it should
> be good for many 100's of volts.
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|