Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tower ID & spider webs

Subject: Re: [TowerTalk] Tower ID & spider webs
From: Mike <nf4l@nf4l.com>
Reply-to: nf4l@nf4l.com
Date: Mon, 11 Apr 2011 09:30:53 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks, Mike. I like the bearing/sleeve arrangement, keeps side forces off the 
rotor.

73, Mike NF4L

On 4/10/2011 9:14 PM, Mike wrote:
> Looks to be a nice tower, strange place for the thrust bearing.  No idea
> what it is though.  Cobwebs are Silk and not conductive.
>
> Mike
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Mike
>
>
> I've been offered a crank-up tower, but the owner has no idea what it is.
> Can anyone
> ID it? Pix at http://nf4l.com/tower/
>
> Are spider webs ( I'm assuming it was a spider, the critter wasn't there)
> conductive?
> My SteppIR control cable has developed an intermittent short, and in the
> junction box
> there was a web across all the pins on one side of a DB-25 connector.
>
> On the ground it's fine.
>
> 73, Mike NF4L
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>