Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crimp on Type N

Subject: Re: [TowerTalk] Crimp on Type N
From: Mike <nf4l@nf4l.com>
Reply-to: nf4l@nf4l.com
Date: Mon, 11 Apr 2011 17:51:40 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks, Alan.

They probably do make different versions. The connectors and coax both came 
from 
Davis, who I regard as a very reputable vendor. Oh well, 2 strands clipped, 
connector on.

73, Mike

On 4/11/2011 4:56 PM, Alan NV8A wrote:
> On 04/11/11 01:34 pm, Mike wrote:
>
>> What's the secret for getting the center pin of a crimp-on type N connector 
>> onto the
>> center conductor of Bury-Flex? Is it OK to clip a couple of strands?
>
> Are you sure they don't make different versions of the connector for cables 
> with 
> different center conductors? I recently used a bunch of clamp-type 
> N-connectors 
> (bought on ebay) on Bury-Flex and the center pins fitted perfectly. But I 
> later 
> bought a couple more at a hamfest and had to cut off some strands.
>
> 73
>
> Alan NV8A
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>