Are they permanently mounted? If so, how do you mount them? Are there
coax connectors with built-in taps?
Dick
--
Dick Flanagan K7VC
dick@k7vc.com
On 5/17/2011 3:16 PM, Phil & Debbie Salas wrote:
> I use an Ohmite MOX-1-123004F across the feed of each of my antennas. This
> is a 3-megohm 2.5W thick-film leaded resistor rated at 10KV breakdown. It
> is essentially invisible up to at least 450 MHz (looking at it with an
> AIMuhf) when placed across an antenna feed. It is $5.30 in unit quantities
> and is available from www.mouser.com, part number 588-MOX-1-123004F.
>
> Phil - AD5X
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|