Towertalk
[Top] [All Lists]

Re: [TowerTalk] Copper Pipe Ground Rods - Driving them in - How ?

To: "Mike Baker" <k7dd@cox.net>
Subject: Re: [TowerTalk] Copper Pipe Ground Rods - Driving them in - How ?
From: "Rick Karlquist" <richard@karlquist.com>
Reply-to: richard@karlquist.com
Date: Wed, 25 May 2011 13:26:57 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mike Baker wrote:

> If it only goes in a foot or so before the ground becomes too hard to go
> much further (Heavy Clay/Caliche) then just turn the water pressure down a
> bit and let it sit. The ground WILL soften and then you can continue.

Depends on the type of ground.  Cemented hard pan will not soften
even if you let it soak for a month.

Rick N6RK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>