Towertalk
[Top] [All Lists]

Re: [TowerTalk] Best way to attach radial to radial plate

To: "Mirko S57AD" <miroslav.sibilja@amis.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Best way to attach radial to radial plate
From: "Mark Robinson" <markrob@mindspring.com>
Date: Sat, 2 Jul 2011 17:10:16 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Should I add a ground rod by each vertical for grounding I wonder

Mark N1UK


----- Original Message ----- 
From: "Mirko S57AD" <miroslav.sibilja@amis.net>
To: <towertalk@contesting.com>
Sent: Saturday, 02 July, 2011 2:38 PM
Subject: Re: [TowerTalk] Best way to attach radial to radial plate


2,5 mH choke (or 10 Mohm resistor) from vertical to ground rod will
protect vertical of static buil-up, and myo may add spark gap as well
for possible direct strike... I saw spark gap buzzing like a wasp quite
often...

73 Mirko, S57AD

S, Mark Robinson piše:
> Maybe a ground rod and a spark gap would protect a
> vertical.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>