On 10/05/11 03:33 pm, K7LXC@aol.com wrote:
>> I used both: STUF on the inside as well as Coax-Seal on the outside.
> Please tell me you didn't put the CoaxSeal directly on the connector.
> While I hate CoaxSeal (since most people put it directly on a connector,
> thus rendering the connector useless if you ever take the connector off), if
> you put a layer or 2 of tape on the connector first, and then put the
> CoaxSeal on followed by 2 more wraps of tape, its use is acceptable.
> Otherwise
> it's a one-time use.
Yes, I did put the Coax-Seal directly on the connectors. They stayed up
in the air at the old QTH for 18 months or so, then I took them apart
when we moved, and I put them together again here. The connectors were
certainly messy but were in no way unusable. I've done the same with
several more since.
73
Alan NV8A
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|