Towertalk
[Top] [All Lists]

Re: [TowerTalk] interaction between 15mono and tribander

To: <john@kk9a.com>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] interaction between 15mono and tribander
From: "Felipe J. Hernandez" <fhdez@vpnet.net>
Date: Fri, 7 Oct 2011 22:47:20 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yes there are 2 ef515 going on the tower one at 100ft and the other at 70ft
I was thinking of setting up the skyhawk at the 90 ft level.

I think its too close for confort, I would rather not do it, because I may
end up
Messing up the stack and I don't have time to experiment.. the contest is in
a few weeks.

73's

Felipe

-----Original Message-----
From: john@kk9a.com [mailto:john@kk9a.com] 
Sent: Friday, October 07, 2011 5:16 PM
To: TOWERTALK@contesting.com
Cc: felipe@np4z.com
Subject: re: [TowerTalk] interaction between 15mono and tribander

It is probably not a good idea to have two 15m beams so close together.  It 
may work if they are pointing in different directions, perhaps that is what 
you are trying to achieve.  A model will clearly show any interaction.  If 
you want more gain, I would just mount a second Skyhawk lower on the tower 
and phase them, which would also improve your signal on 10m and 20m.

John KK9A

To: <TOWERTALK@contesting.com>
Subject: [TowerTalk] interaction between 15mono and tribander
From: "Felipe J. Hernandez" <felipe@np4z.com>
Date: Fri, 7 Oct 2011 15:53:45 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Guys,


How bad will it be in terms of interaction between a tribander (skyhawk) and
a ef-515 5 elem monobander
About 12 feet apart? My concern is that the tribander would mess up the
monobander on 15.

CQ test... NP4Z 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>