Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu rotator line voltage?

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaesu rotator line voltage?
From: EZ Rhino <EZRhino@fastmovers.biz>
Date: Tue, 11 Oct 2011 21:29:20 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
OK, so under 24v for the most part.  
Thanks

Chris







On Oct 11, 2011, at 21:28 , K0DAN wrote:

More or less +/- 12-20 VDC, and in the real world it seems to be pretty 
flexible. Typical caveats of voltage drop on long & high resistance runs. The 
"speed" control on the SDX/DXA controllers varies the motor voltage. The rotor 
seems pretty tolerant: think 33 RPM vinyl disk for your HF array!

73
k0dan

-----Original Message----- From: EZ Rhino
Sent: October 11, 2011 10:03 PM
To: Tower and HF antenna construction topics.
Subject: [TowerTalk] Yaesu rotator line voltage?

Does anyone know what the control line voltage is on Yaesu rotators?

Chris
KF7P



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>