On 10/26/11 09:58 pm, krishna kanakasapapathi wrote:
> I am installing the DB18 on a 75ft crankup. Have a roll of LMR400, the
> solid center conductor type.
> I thought i might just ask before i cut the cable from the roll. Any
> possible issues with
> using the LMR400 on a crankup?
>
> I have arms mounted on each of the 3 sections to keep the cables away
> from the telescoping sections.
I use Davis BuryFlex -- two runs of it at present. They are bundled
together with the rotator cables with electrical tape at intervals and
suspended from the uppermost standoff using Kellem grips. At the bottom
I guide the bundle into a large trash bin with a hole in the lid as the
tower (HDX-555) comes down.
(I really need something with lower loss for the UHF antenna -- LMR600UF?)
73
Alan NV8A
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|