I did not worry about it. I inspect the tower about once a week or so, give it
a good look over and every so often I check bolts, cables, ect. Jest as I
would a new one.
Buster kg9nd
________________________________
From: James Wolf <jbwolf@comcast.net>
To: towertalk@contesting.com
Sent: Monday, January 16, 2012 5:31 PM
Subject: Re: [TowerTalk] Safe to buy 45G with a broken weld or bent rod?
What about the galvanization on the inside of the tower leg?
Jim, KR9U
>I Ditto Jim's notion Have re welded both Rohn section rungs and crank
up sections
>damaged in shipping and from damage from dis assembly and cable failure in
crank ups.
>The only problem would be the metal protection from the lack of any
galvanizing ground
>off in preparation for the weld joint Wayne W3EA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|