Towertalk
[Top] [All Lists]

Re: [TowerTalk] 4Nec2 and NEC/4.2

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] 4Nec2 and NEC/4.2
From: "James Lanier" <lanier.je@gmail.com>
Date: Sat, 21 Jan 2012 17:52:06 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
"That engine is not fully "operational compatible" with 4Nec2.  For one thing 
the DOS 
window doesn't close automatically after the model run time is complete." There 
is a tarball that comes with the NEC4 package. You can untar the package and 
get to a console version of the nec4d.f source code. You can then compile with 
the parameters of your choice (more segments, more radials etc) with MinGW G77 
compiler. You just modify the INC file before compile. The window will close 
after execution. I use 4NEC2 (Arie Voors) and it works fine.You can also change 
the parameters of the NEC2 executables as well. The NEC2 source code is 
available as public domain. Just change the include file with the parametersyou 
want, compile and copy it into the correct folder in 4NEC2. Jim K4BPM
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>