Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crankup Tower for DB-36

To: John Kuklewicz N7ZN <kukl@wildblue.net>, Tower Talk List <towertalk@contesting.com>
Subject: Re: [TowerTalk] Crankup Tower for DB-36
From: Gary Saboe <gerald@saboe.net>
Date: Sun, 29 Jan 2012 00:45:19 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
John, your same question was asked about a year ago on this list regarding what 
tower to use for a DB-36.  I have an UST HDX-772MDPL (spec: max load 700lbs, 
70sq ft @ 70mph) with a SteppIR MonstIR and F12 Sigma-280 Magnum mounted, so 
yes UST does have additional special order towers available--just not listed in 
their catalog or on their website. Mine is based on their HDX-5106 design, 
minus the top two sections.  Call UST and talk with them regarding your needs.

Gary NØGS

-----Original Message-----
From: towertalk-bounces@contesting.com 
[mailto:towertalk-bounces@contesting.com] On Behalf Of John Kuklewicz N7ZN
Sent: Friday, January 27, 2012 3:54 PM
To: Tower Talk List
Subject: [TowerTalk] Crankup Tower for DB-36

Well, after many years of wishing, it looks like 2012 will be the year I 
finally get a tower and yagi added to my station. After many years with 
multi-band verticals and relatively low wires this is a much anticipated 
enhancement. More than likely with will be the one and only tower I will be 
able to install.

I do not have any experience with towers, and would value your inputs on my 
thinking below.

I would very much like to install a Steppir DB-36 on a tower of at least
70 feet. I know, higher would be better, but the next increment in height seems 
to entail a disproportionate increase in cost. After all these years, I really 
would like to have gain antennas on 40 and 30 meters. Per Steppir, the DB36 is 
17.5 sq ft, 160 lbs.

After a lot of soul searching, I have to admit that I am in no shape to be 
climbing towers, and this is not likely to change. And there is not a strong 
local climbing ham population to assist.

So, a crankup/tiltover tower (with NN4ZZ tiltplate) seems to be the only 
solution. The only towers that look even close are the US Tower HDX-572 or the 
Tashjian DX-70.

I am fortunate to live in a rural area with no zoning or permitting 
requirements. I can put up any foolish thing I want. <grin>

Today I was able to obtain an engineering analysis for the HDX-572 and was 
disappointed to learn that the Windload is limited to 14.1 sq ft (exposure B, 
90 mph 3 second gust, 76mph fastest mile.)

The Tashjian DX-70 shows a spec of 47 sq ft (85 mph 3 second gust). 
Clearly this will be adequate (if not somewhat over designed - which is not a 
bad thing). Of course, the DX-70 initial quote I have about $1K more than the 
HDX-572. IT would certainly seem that the increased capacity is worth the 
greater initial expense.

Can anyone help by contributing their experience with a DB36 (or similar large 
antennas) on a crankup in the 70 foot (or taller) class?

Many thanks and 73;

John N7ZN


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>