Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TowerTalk] Prop pitch motor

from [Al Kozakiewicz] [Permanent Link][Original]
To: TowerTalk <towertalk@contesting.com>
Subject: [TowerTalk] Prop pitch motor
From: Al Kozakiewicz <akozak@hourglass.com>
Date: Fri, 9 Mar 2012 15:02:50 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com> 
Saw this on eBay:  
http://www.ebay.com/itm/1944-Curtiss-Small-Prop-Pitch-Rotator-Motor-For-Antenna?item=130661231282&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D6886249197684896447

Al
AB2ZY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Prop pitch motor, Al Kozakiewicz <=
Previous by Date:  Re: [TowerTalk] Wind Surface Area estimates, Gene Fuller
Next by Date:  Re: [TowerTalk] Wind Surface Area estimates, Larry
Previous by Thread:  [TowerTalk] Hustler 6BTV Trap Question, Phil & Debbie Salas
Next by Thread:  [TowerTalk] Radiowavz end fed wire antenna, ronald long
Indexes:  [Date] [Thread] [Top] [All Lists]