The Fulton 2500 LB wrench is no longer available. However, their web site lists
several that should do the job.
http://www.fultonperformance.com/content/default.aspx
Carry-on
Bill-w7kxb/7
> From: jd_hudson@comcast.net
>
> Date: Mon, 12 Mar 2012 13:00:00 -0500
> Subject: Re: [TowerTalk] Winch Adapter
>
> Hi John go to Joe WD0M's web site http://www.wd0m.com/winchadapter.html and
> here's what you need.. I've done it myself and works great..just make sure
> you have a stout drill.
>
> John
> KO4XJ
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
>
> Sent: Monday, March 12, 2012 12:41 PM
> To: TowerTalk@contesting.com
> Subject: [TowerTalk] Winch Adapter
>
> Hi,
>
>
>
> I have a US Tower with the Fulton winches. Some time ago I saw a posting or
> article describing how to make an adapter to use a large electric drill to
> drive the winch. I could have sworn that I saved it but I sure can't find
> it...can anyone help?
>
>
>
> Thanks...John kb9tpg
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|