Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna modelling program

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Antenna modelling program
From: Jim Lux <jimlux@earthlink.net>
Date: Thu, 03 May 2012 12:07:45 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 5/3/12 10:37 AM, Dave Sublette wrote:
> Hello to the group,
>
> I just discovered that the program I use to model antennas is defunct.
> It is/was Antenna Model.  What are the programs that are being used
> successfully by this group?
>
4nec2 is what I use.. a nice graphical front end to the NEC2 engine.  If 
you have a copy of NEC4, it will drive it too.  (and it's free)

EZNEC is also popular.  Lots of sample models out there, and it has more 
"amateur specific" features, I think.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>