I just finished a 2 element 30 meter yagi. Although I used OnlineMetals for
some pieces, I found the best price and selection for element tubing at DX
Engineering.
http://www.dxengineering.com/search/department/rigid-tubing/product-line/dx-engineering-aluminum-tubing?autoview=SKU
Doug - K1ZO
----- Original Message -----
From: "Tim Jellison" <w3yq@hotmail.com>
To: <towertalk@contesting.com>
Sent: Sunday, July 15, 2012 12:23 PM
Subject: Re: [TowerTalk] Aluminum element wall thickness
>
> Steve, I'm not sure how 'local' this is to you. I bought some tubing
> from these guys a couple of months ago (had it shipped to me) and they did
> a good job. I'd use them again. I think they're in Seattle.
>
> http://www.onlinemetals.com/
>
> 73,
>
> Tim KL7WV
>
>>
>> Message: 10
>> Date: Sun, 15 Jul 2012 10:34:58 -0400 (EDT)
>> From: K7LXC@aol.com
>> Subject: Re: [TowerTalk] Aluminum element wall thickness
>> To: towertalk@contesting.com
>> Message-ID: <13db5.7b5d6e54.3d342f12@aol.com>
>> Content-Type: text/plain; charset="US-ASCII"
>>
>> Howdy, TowerTalkians --
>>
>> Tnx to the many folks that confirmed the 0.058" wall thickness. Now if
>> I can just get some locally - hi.
>>
>> Cheers,
>> Steve K7LXC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|