According to the link, 45g is self supporting to 45 feet. I plan on using 45g
self supporting to 40 when
i finally prvail with my permit request
Larry KA5TXL
________________________________
From: "mike@n1ta.com" <mike@n1ta.com>
To: towertalk@contesting.com
Sent: Mon, July 16, 2012 9:21:04 PM
Subject: Re: [TowerTalk] rohn 45G self supporting tower
The 45g series is not a self supporting tower. Rohn does make self
supporting towers, as seen here:
http://www.rohnnet.com/self-supporting-towers . But the 45g is designed
to be guyed, and it is usually not such a good idea to install them
otherwise.
Give us some information on your proposed setup. How high of a tower are
you looking to build? How is the soil there?
Mike N1TA
-------- Original Message --------
Subject: [TowerTalk] rohn 45G self supporting tower
From: "k2vi" <k2vi@cox.net>
Date: Mon, July 16, 2012 9:08 pm
To: <towertalk@contesting.com>
any information on the 45G series self supporting tower. Im looking to
put a light hy-gain 203BA 32 pound antenna with 5.3 sq feet of wind
load. Would this be a sturdy installation? I would use a bracket but
have no attic space and do not have room for guys so this would fit the
bill unless it's a problem. Any thoughts would be apreciated.
tony k2vi
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|