Towertalk
[Top] [All Lists]

Re: [TowerTalk] NAPA Cable Lube?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] NAPA Cable Lube?
From: Bryan Swadener <bswadener@yahoo.com>
Date: Sat, 21 Jul 2012 12:27:18 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thank You Jon,

However, I've already seen that "MSDS" and it doesn't say much.  It DOES say 
Prelube 6 contains one of the ingredients that appears to be common to other 
lubes.  That the US Navy approves it as the sole lube for aircraft carrier 
landing cables doesn't necessarily mean other lubes aren't capable of the same 
use, which isn't at all the use I intend.

At any rate, I have a more serious concern than the cable lube.  I was able to 
get my tower down but, as of minutes ago, I have yet ANOTHER concern that is a 
more immediate problem than the lube.  Oy vey!

vy 73,
Bryan WA7PRC


> Date: Sat, 21 Jul 2012 09:43:30 -0400
> From: Jon Pearl - W4ABC
> Subject: Re: [TowerTalk] NAPA Cable Lube?
> 
> Hi Bryan,
> 
> Mfg: http://www.grignard.com/Wire-Rope-Lubricants/
> MSDS: http://www.msdsxchange.com/english/show_msds.cfm?paramid1=65628
> Amateur Dealer: http://www.championradio.com/Prelube-6-Cable-Lubricant.47
> 
> Interesting quote: "Prelube 6 is the only wire rope
> lubricant approved 
> by the U.S. Navy for use on aircraft carrier arresting
> wires."
> http://www.sea-landdistributors.com/pdf_files/1187725888.pdf
> 
> 
> 73,
> 
> 
> Jon Pearl - W4ABC
> www.w4abc.com
> 
> On 7/20/2012 12:40 AM, Bryan WA7PRC wrote:
> > Thank you, Guy.  I want to be careful, and can
> find no information about the makeup of Prelube 6.  As
> it stands, just moments ago, it appears I now have bigger
> issues that prevent lowering my tower (and the need for a
> cable lube).
> >
> > vy 73,
> > Bryan WA7PRC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>