Towertalk
[Top] [All Lists]

[TowerTalk] Spiderbeam Construction Question

To: <towertalk@contesting.com>
Subject: [TowerTalk] Spiderbeam Construction Question
From: "Marshall Stewart" <marsh@ka5m.net>
Date: Wed, 12 Sep 2012 13:53:12 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
How do the Kevlar guys from the boom and spreader attach to the mast so that
they will hold tension and not slip down or up?  The assembly instructions
seem to say to make a loop at the mast end of the guys and slip them over
the top and bottom of the mast and then slide them up or down to tension.
What keeps them from slipping down or up when the antenna is in service?

I'd appreciate a response from anyone who has a Spiderbeam up.  Thanks.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Spiderbeam Construction Question, Marshall Stewart <=