Towertalk
[Top] [All Lists]

Re: [TowerTalk] Bye Bye Birdies

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Bye Bye Birdies
From: Jim Lux <jimlux@earthlink.net>
Date: Fri, 28 Dec 2012 20:59:22 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 12/28/12 8:15 PM, Charlie Gallo wrote:

On 12/28/2012 Jim Lux wrote:

...snip...

Yes, but typically one side is fairly conductive (the side with the
aluminum), and if you do something like tie it onto your antenna, it
will couple quite nicely by capacitance, if not direct contact.

That is ASSUMING you are talking about aluminized mylar.  Mylar is nothing more than 
sheet polyester, and is NOT always aluminized.  In fact, you can get it clear, as well as 
other non metallic colors.  Basically we most commonly run into the metalized versions, 
but that is not always the case, so as I said, "it depends".  Aluminized mylar 
= conductive (duh - aluminum), NON metalized mylar = insulator



the reflective ribbon stuff for birds is almost certainly aluminized...


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>