Towertalk
[Top] [All Lists]

Re: [TowerTalk] Drill Guide for drilling holes in Al Tubing

To: TowerTalk@contesting.com
Subject: Re: [TowerTalk] Drill Guide for drilling holes in Al Tubing
From: Drax Felton <draxfelton@gmail.com>
Date: Fri, 29 Mar 2013 00:45:12 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
A notched vee shaped block and drill works too. Right?

Sent from my iPhone

On Mar 29, 2013, at 12:37 AM, Bert Almemo <balmemo@sympatico.ca> wrote:

> I agree with you Gary. The Big Gator drill guide is a simpler, smarter and
> easier-to-use solution. Thanks for the tip.
> 
> 73 Bert, VE3NR
> 
> 
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Gary
> K9GS
> Sent: Thursday, March 28, 2013 10:53 PM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Drill Guide for drilling holes in Al Tubing
> 
> I'm the original poster.
> 
> I actually have one of these, exactly like the DX  Engineering one, that I
> purchased at a woodworking store.  While it works OK, there are a number of
> disadvantages:
> 
> It has a bunch of small pieces that are easy to lose, especially if you're
> working outside.  The way the drill inserts fit into the plastic holder
> leaves a lot to be desired.
> 
> It's also hard or impossible to clamp it in place.  The Big-Gator one I
> posted about doesn't have that problem.
> 
> Such is the way with tools....
> 
> 
> 
> 
> On 3/28/2013 8:33 PM, Tim Duffy wrote:
>> Hello Larry,
>> 
>> The drill guides from DX Engineering are inexpensive and work very 
>> well. I used them to build several antennas last summer.
>> 
>> 
>> http://www.dxengineering.com/search/product-line/dx-engineering-drill-
>> guide- kits?autoview=SKU&keyword=drill%20guide
>> 
>> 73,
>> Tim K3LR
>> 
>> 
>> -----Original Message-----
>> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of 
>> Larry
>> Sent: Thursday, March 28, 2013 8:23 PM
>> To: towertalk@contesting.com
>> Subject: Re: [TowerTalk] Drill Guide for drilling holes in Al Tubing
>> 
>> DX Engineering sells a drill guide for drilling perpendicular holes. I 
>> have seen the same guide elsewhere although I don't remember where 
>> (maybe Rockler
>> 
>> another woodworking seller?). I have not personally used it.
>> 
>> 73, Larry  W6NWS
>> 
>> -----Original Message-----
>> From: Gary K9GS
>> Sent: Thursday, March 28, 2013 9:08 PM
>> To: Towertalk Mailing List
>> Subject: [TowerTalk] Drill Guide for drilling holes in Al Tubing
>> 
>> I'm also a woodworker and saw an ad for a drilling guide that looks 
>> like it might be just the thing for drilling perpendicular holes in 
>> aluminum and steel tubing like we like to use for ham radio projects.
>> 
>> http://www.woodcraft.com/category/2085336/big-gator-tools-vdrillguide-
>> portab
>> le-drilling-guide.aspx
>> 
>> I'll have to pick one of these up.
>> 
>> Note that I used a link for Woodcraft because they had the best 
>> description and photos.  These are available from multiple sources.
>> Just Google "Big Gator Tools".
> 
> -- 
> 
> 
> 73,
> 
> Gary K9GS
> 
> Greater Milwaukee DX Association: http://www.gmdxa.org Society of Midwest
> Contesters: http://www.w9smc.com
> CW Ops #1032   http://www.cwops.org
> 
> ************************************************
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>