Hi John,
I have (most of it) Heights Tower parts but added in some "missing" parts from
Universal Towers. When I was finished it added up to 85 feet. (With the guy
wires 20 sqf will survive 135 mph wind).
They have self-supporting (no guy wires) towers, something you should consider
as you will not have the trouble with the wires when you add something and you
don't have to worry about the wires being in the way when you add something,
like new antennas, to the tower.
I had very good experience dealing with Universal.
73 de,
Hans - N2JFS
-----Original Message-----
From: john nistico <electric911inc@hotmail.com>
To: towertalk <towertalk@contesting.com>
Sent: Wed, Feb 19, 2014 9:00 pm
Subject: [TowerTalk] 20 Foot Aluminum tower.
My xyl has decided to let me put up a small tower and a hex beam. I am looking
at an aluminum tower 2 sections I can put up and take down for contests. Any
Ideas?
John J. Nistico
911 Electric Inc.
516.356.6071
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|