Does the antenna actually move backwards or is it just the pointer on the
control box you are watching??
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Mike
Ryan
Sent: Wednesday, April 16, 2014 00:16
To: towertalk
Subject: [TowerTalk] Yaesu Rotor Question
I have a Yaesu 1000 DXA rotor on the tower. It is in a NORTH centered
configuration. Recently, I have noticed that when I am rotating the antennas
to the southeast (anything south of east for all practical purposes) the
rotor 'springs back' or backtracks after I have let off the rotational
control button...sometimes as much as 20 degrees of rotation. It is almost
as if there is a SPRING or something pulling back the antenna. Anyone ever
have this happen, and if so what was or is there a fix? Thanks for eading.
- Mike
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|