Towertalk
[Top] [All Lists]

Re: [TowerTalk] Keeping antennas straight

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Keeping antennas straight
From: <john@kk9a.com>
Date: Sat, 19 Apr 2014 15:35:52 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It is not clear from your post what is not straight.  Google search did not
show any pictures of your station.  Since you mentioned pinning and the Slip
Knott, I am guessing that you mean that the antennas are slipping on the
mast and facing different directions.  If you use a heavy enough mounting
plate and good saddle clamps it should not slip.  DX Engineering saddle
clamps work great, but even muffler clamps hold pretty well.

John KK9A


To:      <towertalk@contesting.com>
Subject:         [TowerTalk] Keeping antennas straight
From:    "Joe Barnes" <n4jbk@comcast.net>
Date:    Sat, 19 Apr 2014 12:00:39 -0400

Does anyone have a suggestion other than pinning or the Tennadynes Slip
Knott 
for keeping antennas from moving around in the wind? All of my aluminum has 
sprouted at over 100 feet in the air and is a bear to keep straight in these

winds that we get here in Florida in some of these storms. Thank you for
your 
input. 

Joe N4JBK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>