Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tower cost estimate?

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Tower cost estimate?
From: Bryan Swadener via TowerTalk <towertalk@contesting.com>
Reply-to: Bryan Swadener <bswadener@yahoo.com>
Date: Tue, 5 Aug 2014 11:58:21 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Based on my tower project (http://www.tinyurl.com/wa7prc-tower), I'd guess 
around $5K... about half for the parts and (paraphrasing Yogi Berra) the other 
90% for labor and beer. YMMV.

There's a US Tower TX455 for sale on QRZ right now. A fellow won it at Dayton, 
and can't use it.


vy 73,
Bryan WA7PRC

> Aug 5, 2014 01:35:01 PM, Stan K2STN wrote:
>>
>> Hi all, I need to get a rough estimate of what it would cost to install a
>> ground mounted, self supporting 55 to 60 foot tower, supporting a 6 meter
>> ground plane.
>>
>> Cost would include... say a run of LMR400 with proper tower and cable
>> grounding and an entrance panel. Would Rohn45 be up to that task?
>>
>> Location; up in the hills of northern New Jersey.
>>
>> Thanks for your help,
>>
>> Stan
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>