Towertalk
[Top] [All Lists]

Re: [TowerTalk] More fun with ground plane modeling

To: towertalk@contesting.com
Subject: Re: [TowerTalk] More fun with ground plane modeling
From: Bill Turner <dezrat@outlook.com>
Date: Wed, 10 Sep 2014 12:20:17 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
------------ ORIGINAL MESSAGE ------------(may be snipped)

On Wed, 10 Sep 2014 11:13:03 -0700, K9YC wrote:

>
>SWR is a lousy measure of antenna performance -- the only thing it 
>indicates is match to the chosen transmission line. Far better to 
>compute the full 3-D field strength and study field strength at the 
>desired vertical and horizontal angles.

REPLY:

You really need both good SWR and good patterns to have a good
antenna. Sacrifice either one and you have a lousy antenna. A bad
pattern will not harm your rig but a bad SWR can send it to the radio
hospital.  :-)

I haven't done 3D modeling but I have done 2D in azimuth and elevation
and the patterns are almost identical to a traditional ground plane.
Only when the vertical element gets close to or beyond a half wave
does the pattern really change. Mine is no where near that. 

73, Bill W6WRT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>