[TowerTalk] Any danger of burning up SteppIR with Shunt fed tower?

Towertalk

[TowerTalk] Any danger of burning up SteppIR with Shunt fed tower?

To:	[email protected]
Subject:	[TowerTalk] Any danger of burning up SteppIR with Shunt fed tower?
From:	RLVZ--- via TowerTalk <[email protected]>
Reply-to:	[email protected]
Date:	Thu, 4 Dec 2014 16:30:04 -0500
List-post:	<[email protected]">mailto:[email protected]>

Hi Guys,
 
I've got a 3-el. SteppIR mounted on top of a grounded  self-supporting 60' 
tower.  Are there any dangers of burning up the SteppIR  controller or 
element motors if I Shunt Feed the tower for  160-m., locate a Sloper for 
160-m. 
near the top of the tower, or use the  tower for a 160m. Inverted L?
 
Thanks & 73,
 
Dick- K9OM
 
 
_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Any danger of burning up SteppIR with Shunt fed tower?, RLVZ--- via TowerTalk <=

Previous by Date:	Re: [TowerTalk] Crimp-on connectors for hardline., maflynn
Next by Date:	Re: [TowerTalk] Crimp-on connectors for hardline., Steve Maki
Previous by Thread:	Re: [TowerTalk] Crimp-on connectors for hardline, Kenneth Goodwin
Next by Thread:	[TowerTalk] Ring Rotor ?, Wayne Kline
Indexes:	[Date] [Thread] [Top] [All Lists]