Towertalk
[Top] [All Lists]

Re: [TowerTalk] Arrestor placement

To: "reflector -tower" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Arrestor placement
From: "David Robbins" <k1ttt@arrl.net>
Date: Sat, 27 Dec 2014 18:58:22 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yes, it can make a big difference.  Lightning arresters are NOT just protecting 
you from a strike on your antenna.  They also protect you from a strike on the 
power line or even just to the ground nearby that causes the ground system 
voltage to rise while the voltage on the center of the coax doesn't... if the 
arrester is not very close to the radio it delays the arrester action which can 
make your radio the easiest path from ground to the center conductor... in hv 
engineering terms its called a backflashover, which is caused when lightning 
hits the ground system causing a flashover to a power conductor.

David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of David 
Gallatin via TowerTalk
Sent: Saturday, December 27, 2014 18:49
To: TowerTalk@contesting.com
Subject: [TowerTalk] Arrestor placement

Hello all,Somehow I have gotten the idea that one's lightning arrestors are 
best placed at the bottom of the tower. This seems logical to me. Then I came 
across another piece that said, no, arrestors are to be placed at the shack 
entrance panel. Which is it? Or does it matter?  73, David, AA9G

ex W5DCG and KC9EEV

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>