Dear OMs
If you full retract the director/s and reflector then it will take
longer switching to forward or reverse directions. The preset
bi-directional setting only moves the tape a few inches and so takes little
time.
Also as previously stated, SteppIR states that there is gain in both
forward and reverse directions when using their bi-directional setting.
73 Doug EI2CN
-----Original Message-----
From: TowerTalk [mailto:[email protected]] On Behalf Of Jim
Thomson
Sent: 02 February 2015 04:52
To: [email protected]
Subject: [TowerTalk] Steppir BI-directional mode
Date: Sat, 31 Jan 2015 12:28:14 -0500
From: <[email protected]>
To: <[email protected]>
Subject: Re: [TowerTalk] Steppir BI-directional mode
Why not retract the reflector and director and use it as a dipole?
John KK9A
## sure, that will work. But if a DIR-DE-DIR combo yields bi-directional
gain, that would be even better. I will have to model it, since nobody
really knows for sure.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|