Towertalk
[Top] [All Lists]

[TowerTalk] Internet Control of M2 Rotator Controllers

To: <towertalk@contesting.com>
Subject: [TowerTalk] Internet Control of M2 Rotator Controllers
From: Paul Christensen <w9ac@arrl.net>
Date: Tue, 03 Feb 2015 12:44:37 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Looking for ideas to control a pair of existing M2 RC2800PX rotator units
through 
the Internet.   The M2 control box has a DB-9 serial connection that can
be 
converted to USB with an adapter.  A dedicated PC is being installed at
the remote site, so we would like to run software control through the PC
rather than serial-to-LAN servers or station control hardware devices, at
least for now.  

I looked at DDUtil software but it seems that LP-Bridge may be needed to
negotiate data between the M2 controllers and DDUtil software.  I¹m not
opposed to that but we¹re looking for a simple and reliable way to get
this up and running, then possibly move to a more exotic means in the
future.  Anything that uses HRD in any way is absolutely not an option.
Tnx!

Paul, W9AC  


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>