Date: Thu, 26 Feb 2015 16:47:30 +0000 (UTC)
From: Drax Felton <[email protected]>
To: Richard Solomon <[email protected]>, <[email protected]>
Subject: Re: [TowerTalk] Mosley Antenna Question
Could it be that LMR400 wasn't available or too expensive way back when the
Mosley manual was written??
## LMR 400 wont flex, it has a 10 ga solid center conductor. LMR-400UF
would work. As long as its
50 ohms, and flexible, it will work. For folks with rotary towers, rigid coax
can be used from each yagi
to a remote switch box. The only coax that needs to flex is the loop at the
base of the tower. Event hat
short piece can be spliced back into more rigid stuff..and off to the station
100 ft away.
Jim VER7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|