I do that as well.
Another option is installing a PL259 on the coax in the usual way, then
mounting an so-239 to a piece of aluminum angle on the boom (or wherever), and
solder a wire from the center output of the so-239 to one side of the element.
Chris
KF7P
On May 10, 2015, at 14:49 , Gene Smar wrote:
Bob:
If you do remove the balun and need to connect the coax directly to
the feed point, let me suggest this as a way of providing two good wire
leads off the end of the coax:
http://lists.contesting.com/archives//html/Towertalk/2007-02/msg00034.html .
If you use the coax braid as one connection exposed to the weather, it may
wick moisture into the rest of the shield, corroding the connection. My
coax balun at the feed point to my Bencher Skyhawk has this connection at
the feed pont and I see nothing that causes me to want to re-do the
connection.
FWIW.
73 de
Gene Smar AD3F
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|