Towertalk
[Top] [All Lists]

[TowerTalk] FW: Coax STubs for SO2R

To: <towertalk@contesting.com>
Subject: [TowerTalk] FW: Coax STubs for SO2R
From: "Matt" <maflukey@gmail.com>
Date: Mon, 7 Sep 2015 22:00:19 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
One afterthought, just want to confirm that you have the stub tee'd into the
40m transmitter line and not the 20m receiver line.



-----Original Message-----
From: Matt [mailto:maflukey@gmail.com] 
Sent: Monday, September 07, 2015 8:07 PM
To: towertalk@contesting.com
Subject: FW: [TowerTalk] Coax STubs for SO2R

Hi Mike,

Just a few thoughts: Was you stub open or shorted?  1/4 wave shorted 40m
stub should produce about 25-30 db nulls on 20m & 10m, but not 15m.   Also
may want to verify the tuning of the stub - it may be nulling some frequency
out of the band.   How close (how much coupling) are you getting between the
antennas, it may also be that a single stub is insufficient attenuation, and
your receiver AGC may be masking the attenuation that you are getting.

Hope these thoughts help.

Matt
KM5VI




-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Mike
Smith VE9AA
Sent: Monday, September 07, 2015 5:36 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Coax STubs for SO2R

I've seen the K2TR stubs, K1TTT page and have recently bought the FB book by
W2VJN

Today, for a change, I had a little spare time so built 2 stubs, but lets
just concentrate on one.

It was supposed to be for the 40m transmitter.  

I roughed out the length, attached a T and my antenna switch (a la VA2UP
method) (which I'll only use for stubs, trimmed it with my AA-230pro

and when it's inline (parallel to my primary antenna switch) I see no
difference at all on 20m or 15m on my 2nd receiver when the stub is in or
out of line

NONE.  Like, not even a titch ESP hopeful. (hi)

 

I presume this is a type 1 stub (shorted 1/4WL type, x velocity factor)

 

Thinking I had done something wonky, I made another stub from different
coax..same result.

 

Anyone been down this road?

 

Too close to rig?

 

Interaction from my T and 2nd antenna switch?  Gremlins? Wrong method using
the AA-230 pro maybe?  I am close to that 23' mark.

 

de Mike (SO2R hopeful) VE9AA

 

 

Mike, Coreen & Corey

Keswick Ridge, NB

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>