Towertalk
[Top] [All Lists]

Re: [TowerTalk] [Bulk] Re: 40 metres yagi - Your advice matters

To: "luciano_nachif@yahoo.com" <luciano_nachif@yahoo.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] [Bulk] Re: 40 metres yagi - Your advice matters
From: Grant Saviers <grants2@pacbell.net>
Date: Sun, 25 Oct 2015 17:06:19 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I've built two of the scratch build W6NL 40m Moxons. It performs as Dave claims. It was not an inexpensive antenna to build given some of the element parts. Probably about the same as buying a commercial 40 and modifying it. It weighed in under 100#. A full size 3L will weigh 2 to 3 times as much or more, so tower and rotator need to be a lot beefier but may have the F/B you want.

However, I recently had a QSO with Dave and he said he has a re-design in the works to use only the stock sizes of DX Engineering tubing. That would save a lot, rather than searching around from distributors that rarely stocked telescoping sizes, although I note that On Line Metals now shows many telescoping wall sizes. DXE has a great selection of diameters and wall thicknesses available at good prices. All of my tubing came from them unless they didn't stock it.

Grant KZ1W


On 10/25/2015 7:23 AM, luciano_nachif@yahoo.com via TowerTalk wrote:
Firstly, I would like to thank y'all for helpful comments. I do appreciate 
different points-of-view.

On my previous email, I didn't mention I already have a Cushcraft 40-2CD on a 
120 feet tall tower driven by an Yaesu G2800.

The idea of building a 40m full size yagi antenna called my attention, so did 
the W6NL style moxon. May my 40-2CD be converted into a W6NL moxon style one. 
Any ideas? Comments?

6061-T6 aluminum cannot be found in Brazil. If I choose to build either the 
moxon on the full sized yagi, I will have to buy that kind of aluminum from an 
American warehouse. Any that has good prices? Import tax and transport into 
Brazil will add another 70% on the top of everything.

Front-to-back is quite important to me. There are several Argentinean stations 
running high power. They all have very good antennas.

Narrow pattern is a wish but I have understood it comes with more elements 
which leads to more money and weight.

So, once again, any comments or ideas? I'm all ears!

73,

Luciano PT9KK

Sent from my HTC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>