Insulators are easy to make, either by laying up cloth to make your own
base to staer, or turning dowm larger rod.
BUT: Three things to remember:
Fiberglass is very sensitive to UV and moisture.
Fiberglass insulators need to be sealed with a UV protective coat and
one that prevents moisture ingress.
Fiberglass is very abrasive to tools. It will quickly dull ordinary
tools. Keep the dust off ways and bearings.
At Amateur power levels they do not need to be overly long, even at half
wave length radiators.. Were I to make them, I'd add an overhang that
would prevent water from forming a low resistance path to ground. In
many areas, we are long past the days of clean, soft, high resistance
rain water. Around here the stuff eats solder joints and quickly turns
shiny, smooth Al to a rough, dull finish that will rub off as a dull
white powder.
You don't need to be an EE to make them. Just look up the designs
(shapes) used for available towers.
They do need to be large enough to provide enough strength to hold the
vertical and prevent arcing.
Fiberglass with sufficient lengthwise fibers provide strength against
breaking from leverage
A core made with alternating layers of linear and 45 deg bias fibers
should be extremely strong.
73
Roger (K8RI
On 12/11/2015 12:09 PM, wosborne44@gmail.com wrote:
Hi All,
Thanks for all the comments on guying aluminum towers. I should have
told you that this tower is only for wires or verticals so little wind
load except for the tower itself.
So second question does anyone have fiberglass insulators for the base
of a universal tower or know someone who makes them for a price? I
see them for Rohn 25 sometimes but never for the Universals. They
look like all you need is a lathe and some fiberglass dowels to start,
but what do I know I am an EE NOT ME.
Thanks,
William Osborne--K5ZQ
270-205-9565
Wosborne44@gmail.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|