Towertalk
[Top] [All Lists]

Re: [TowerTalk] 80M 4 Square Array Material options

To: Towertalk Reflector <towertalk@contesting.com>
Subject: Re: [TowerTalk] 80M 4 Square Array Material options
From: EZ Rhino <EZRhino@fastmovers.biz>
Date: Fri, 29 Jan 2016 17:31:54 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

>>Has anyone ever heard a credible story about a 4 square made of irrigation 
>>pipe that failed?  
>>Patrick        NJ5G


YES!!  firsthand...

W7HPW's original four square of 3" (or was it 4"?  can't remember) irrigation 
pipe came down about six months after it went up.  All four of them.  They got 
some kind of a resonsance/vibration going during a storm and it fractured the 
tubing part way up.  I think they were guyed at two levels.  I know people use 
this stuff to do four squares; I know it's cheap, light, and easy to work with. 
 Some may have better luck than others.  But is it certainly the wrong material 
to use for something like this.

He replaced them with some verticals that Zero-Five put together, very well 
made, thick wall tubing at the base with a nice taper to the top.

If I had the land to do a foursquare, I'd use F12 Sigma vertical dipoles.  No 
ground wires to lay down!

Chris
KF7P

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>