Hi again
I got a few direct replies and most of the indicate that the pot on the
rotator is dead. For info this PST61 is up for more than 12 years and the
only thing that failed once was the capacitors inside the control box.
I really hope it is only the pot on the rotator.
Thanks guys
73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M
2016-08-14 18:41 GMT+01:00 Filipe Lopes <ct1ilt@gmail.com>:
> Hi guys,
>
> I am rebuilding the station and as we put the new antenas up I have the
> problem in the video down the link. Does anyone have had this issue ?
>
> The rotator turns it just gets stuck at the display when using the PRESET
> and as you can see in the video:
>
> https://drive.google.com/file/d/0BzhyfzONNMCPVW5HX0phUjhZNEU/
> view?usp=drivesdk
>
> thanks for help
>
> 73's Filipe Lopes
> CT1ILT - CR6K
> F4VPX - TM3M
>
> Sent from my Huawei Mate 8
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|