Towertalk
[Top] [All Lists]

Re: [TowerTalk] Booms

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Booms
From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Mon, 13 Mar 2017 05:11:19 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The company is Stauff. There's a link two lines down in Peter Voelpel's post
They carry a whole line of  fittings like we've been talking about.

73

Roger (K8RI)

On 3/12/2017 10:26 PM, Lee wrote:
What is the name of the US company that sells saddles like this? I once knew but lost the info.

Lee, w0vt


On 3/12/2017 8:58 PM, Roger (K8RI) on TT wrote:
With a mast that big (150 mm = 5.9055" ) the saddle you are using makes more sense. The large saddle that contact close to half the mast would be huge.

73, Roger (K8RI)

On 3/12/2017 7:05 PM, Peter Voelpel wrote:
I use these U-boöts for booms:

http://www.stauff.com/index.php?id=4022&L=1&MP=3979-3980

The 2" and 3" U-bolts are already with M12 threads.
Their smallest for 20mm pipe is M10!

My boom to mast clamps are M16 (150mm mast size).

And those clamps for the elements:

http://www.stauff.com/index.php?id=3909&L=1&MP=3897-3922

There is also a heavy duty line of clamps which I use on my 40m yagi.

73
Peter, DJ7WW
<whole lot of history snipped>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>