Towertalk
[Top] [All Lists]

[TowerTalk] EFHW

To: towertalk@contesting.com
Subject: [TowerTalk] EFHW
From: Tom Osborne <w7why1@gmail.com>
Date: Sat, 15 Jul 2017 09:20:58 -0700
List-post: <mailto:towertalk@contesting.com>
Hi All

I built 3 UNUN's for some EFHW antennas I plan to use.  On 2 of them, I
used 1 FT-240 mix 43 core (will be running these as portable antennas on
LP) and one one of them I used 2 of the same cores.

With around 135 feet of wire, the 80 meter SWR is right where I want it -
around 3550.  But - when I go to 40, the SWR is lowest around 6950.  If I
increase the length of the wire to bring the frequency up on 40, it will
resonate around 3700, on 80 which is not what I want.

The UNUN's I build have 2 turns of twisted wire wrapped around the core,
and then 5 more to make 7 turns.  Then it crosses over to the other side
and has 7 more turns.  This seems to be what most of the ones I found on
the 'net have, Across the coax connector I have 150pF capacitance.

Why would the 2nd harmonic be so far off on 40?  Is there a better turns
ration solution for the cores??  Tanks and 73
Tom W7WHY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>