Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yagi Optimizer file "Match" line

To: Chuck Dietz <w5prchuck@gmail.com>
Subject: Re: [TowerTalk] Yagi Optimizer file "Match" line
From: Stan Stockton <wa5rtg@gmail.com>
Date: Sun, 24 Sep 2017 10:52:29 -0500
List-post: <mailto:towertalk@contesting.com>
Dan,

I've got the manual somewhere on some computer.  I'll look for it in the next 
day or two if you still need it.

Stan, K5GO

Sent from Stan's IPhone



> On Sep 23, 2017, at 11:15 AM, Chuck Dietz <w5prchuck@gmail.com> wrote:
> 
> There is a way to calculate the match parameters in YO. I don't use it.
> That may be the output for that calculation. If you run that .YAG file in
> YO, it should tell you.
> There is no manual that I know of.
> 
> Chuck W5PR
> 
>> On Sat, Sep 23, 2017 at 10:48 AM, Chuck Dietz <w5prchuck@gmail.com> wrote:
>> 
>> Where does this line appear?  is it just above the element table?  Is it a
>> 6 meter yagi file?
>> The line just above the element table is the diameter of the tubing for
>> each element section. The table below lists the lengths
>> 
>> 6 El 6M beam on 24' Boom
>> Stacked 240.000
>> 50.000 50.150 50.300 MHz
>> 6 elements, inches
>>                 1.5000    0.8750    0.6250    0.4375
>>  0.0000    3.5000   21.0000   23.5000   14.5340
>> 36.6370    3.5000   21.0000   23.5000   10.0887
>> 70.8626    3.5000   21.5000   23.5000    7.4651
>> 145.4953    3.5000   21.5000   23.5000    6.0914
>> 211.4772    3.5000   21.5000   23.5000    5.3854
>> 288.0000    3.5000   21.5000   23.6027    0.0000
>> 
>>    Made from Hy-Gain 104CA
>> Data for 2 beams stacked with 20' spacing.  Gamma match
>> 
>> The stuff below the table are the notes manually typed in.
>> The low-center-high frequencies for optimization are listed just below the
>> "240.000"
>> maybe the file is scrambled.
>> 
>> Chuck W5PR
>> 
>> On Sat, Sep 23, 2017 at 12:58 AM, Dan Maguire via TowerTalk <
>> towertalk@contesting.com> wrote:
>> 
>>> I have a K6STI YO (.yag) file that has this line:
>>> 
>>> Match: 2 0.3750 4.5000 54.0000 6.0000 0.0 50.0 0.0800
>>> 
>>> Can anyone interpret those parameters for me?  And a second question,
>>> does anyone have any documentation for YO files that explains this line?
>>> Perhaps the user manual for the most recent (?) version of YO?
>>> 
>>> Dean Straw's "Yagi for Windows" manual does a good job of describing "YO
>>> like" file formats but doesn't mention a "Match" line.
>>> 
>>> Thanks.
>>> 
>>> Dan, AC6LA
>>> _______________________________________________
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>> 
>> 
>> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>